1 registering arp table, 2 displaying arp table – Siemens S223 User Manual
Page 166
UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
166 A50010-Y3-C150-2-7619
7.13.1.1 Registering
ARP
Table
The contents of ARP table are automatically registered when MAC address corresponds
to MAC address is founded. The network administrator could use MAC address of spe-
cific IP address in Network by registering on ARP table.
To make specific IP address to be accorded with MAC address, use the following com-
mand.
Command Mode
Description
arp
A.B.C.D MACADDR
Sets a static ARP entry, enter the IP address and the
MAC address.
MACADDR: enter the MAC address.
arp
A.B.C.D MACADDR INTER-
FACE
Global
Sets a static ARP entry, enter the IP address, the MAC
address and enter an interface name.
INTERFACE: enter an interface name.
MACADDR: enter the MAC address.
To delete registered IP address and MAC address or change all the contents of ARP table,
use one of the following command.
Command Mode
Description
no arp
A.B.C.D
Negates a command or set sets its default
no arp
A.B.C.D INTERFACE
Global
Negates a command or set sets its default, enter the IP
address and enter the interface name.
clear arp
Deletes all the contents of ARP table.
clear arp
INTERFACE
Enable
Global
Deletes all the contents of ARP table, enter the inter-
face name.
7.13.1.2 Displaying
ARP
Table
To display ARP table registered in switch, use one of the following command.
Command Mode
Description
show arp
Shows ARP table.
show arp
{INTERFACE | A.B.C.D}
Enable
Global
Shows ARP table for specified interface, enter the in-
terface name or IP address. (br1, br2, ...).
The following is an example of registering 10.1.1.1 as IP address and 00:d0:cb:00:00:01
as MAC address. This command displays ARP table.
SWITCH(config)# arp 10.1.1.1 00:d0:cb:00:00:01
SWITCH(config)# show arp
------------------------------------------------------------
Address
HWaddress
Type
Interface
------------------------------------------------------------
10.254.254.105 00:bb:cc:dd:ee:05
DYNAMIC
br4094
10.2.2.1 00:00:cd:01:82:d0
DYNAMIC
br2
SWITCH(config)#