2 robustness count for igmp v2 snooping, 5 igmp v2 snooping, 2 robustness count for igmp v2 snooping 9.2.5 – Siemens S223 User Manual
Page 289: Igmp v2 snooping
![background image](/manuals/143828/289/background.png)
User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 289
Step 3
Enable IGMP snooping on a VLAN interface.
Command Mode
Description
ip igmp snooping vlan
VLANS Global
Enables IGMP snooping on a VLAN interface.
VLANS: 1-4094
Step 4
Return to Privileged EXEC Enable mode using the exit command.
To diable IGMP snooping on a VLAN interface, use the no ip igmp snooping vlan
VLANS
command for the specified VLAN number.
To display global IGMP, use the following command.
Command Mode
Description
show ip igmp snooping
[vlan
VLANS
]
Enable
Global
Bridge
Shows IGMP snooping configuration.
9.2.4.2
Robustness Count for IGMP v2 Snooping
Configure the robustness variable on a VLAN basis, using the following command.
Command Mode
Description
ip igmp snooping
[vlan VLANS] robustness-
variable
<1-7>
Configures the robustness variable.
no ip igmp snooping
[vlan VLANS] robustness-
variable
Global
Returns to the default value.
9.2.5
IGMP v2 Snooping
Layer 2 switches can use IGMP snooping to constrain the flooding of multicast traffic by
dynamically configuring Layer 2 interfaces so that multicast traffic is forwarded to only
those associated with IP multicast devices. Internet Group Management Protocol (IGMP)
is the internet protocol that helps to inform multicast groups to multicast router. In the mul-
ticast network, multicast router sends only IGMP query massage that quest whether re-
ceive multicast packet when multicast packet is transmitted. If a switch sends the join
massage to multicast router, multicast router transmits the multicast packet only to that
switch.