8 activating rmon alarm, 9 deleting configuration of rmon alarm, 10 displaying rmon alarm – Siemens S223 User Manual
Page 132: 3 rmon event, 1 event community, Rmon event
UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
132 A50010-Y3-C150-2-7619
To configure interval of sample inquiry for RMON alarm, use the following command.
Command Mode
Description
sample-interval
<0-65535>
RMON
Configures interval of sample inquiry.
(unit: second)
7.4.2.8 Activating
RMON
Alarm
After finishing all configurations, you need to activate RMON alarm. To activate RMON
alarm, use the following command.
Command Mode
Description
active
RMON
Activates RMON alarm.
7.4.2.9
Deleting Configuration of RMON Alarm
When you need to change a configuration of RMON alarm, you should delete an existing
RMON alarm.
To delete RMON alarm, use the following command.
Command Mode
Description
no rmon-alarm
<1-65535>
Global
Deletes RMON history of specified number, enter the
value for deleting.
7.4.2.10 Displaying
RMON
Alarm
To display RMON alarm, use the following command.
Command Mode
Description
show
running-config
rmon-
alarm
All
Shows a configured RMON alarm.
7.4.3 RMON
Event
RMON event identifies all operations such as RMON alarm in the switch. You can config-
ure event or trap message to be sent to SNMP management server when sending RMON
alarm.
You need to open RMON Event Configuration mode to configure RMON event.
Command Mode
Description
rmon-event
<1-65535>
Global
Opens RMON Event Configuration mode.
1-65535: index number
7.4.3.1 Event
Community
When RMON event is happened, you need to input community to transmit SNMP trap
message to host. Community means a password to give message transmission right.