Siemens S223 - Manual (Page 111)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 111
snmp trap dhcp-lease
Configures the system to send SNMP trap when no
more IP address that can be assigned in the subnet of
DHCP server is left.
snmp trap fan
Configures the system to send SNMP trap when the
fan begins to operate or stops.
snmp trap power
Configures the system to send SNMP trap when any
problem occurs in power.
snmp trap module
Global
Configures the system to send SNMP trap when there
is any problem in module.
7.1.8.4 Disabling SNMP Trap
To disable SNMP trap, use the following command.
Command Mode Description
no snmp trap auth-fail
no snmp trap cold-start
no snmp trap link-up PORTS
[NODE]
no snmp trap link-down PORTS
[NODE]
no snmp trap cpu-threshold
no snmp trap port-threshold
no snmp trap temp-threshold
no snmp trap dhcp-lease
no snmp trap fan
no snmp trap power
no snmp trap module
Global Disables each SNMP trap.
When you use the no snmp command, all configurations concerning SNMP will be
deleted.
!