Siemens S223 - Manual (Page 189)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 189
8.1.10 VLAN Translation
VLAN Translation is simply an action of Rule. This function is to translate the value of
specific VLAN ID which classified by Rule. The switch makes Tag adding PVID on
Untagged packets, and use Tagged Packet as it is. That is, all packets are tagged in the
Switch, and VLAN Translation is to change the VLAN ID value of Tagged Packet in the
Switch. This function is to adjust traffic flow by changing the VLAN ID of packet.
Step 1
Open Rule Configuration mode using rule NAME create command..
Step 2
Classify the packet that VLAN Translation will be applied by Rule..
Step 3
Designate the VLAN ID that will be changed in the first step by the match vlan <1-4094>
command.
Step 4
Open Bridge Configuration mode using the bridge command.
Step 5
Add the classified packet to VLAN members of the VLAN ID that will be changed.
8.1.11 Sample Configuration
[Sample Configuration 1] Configuring Port-based VLAN
The following is assigning vlan id of 2,3 and 4 to port 2, port 3, and port 4.
default br2 br3 br4
SWITCH(bridge)# vlan create 2
SWITCH(bridge)# vlan create 3
SWITCH(bridge)# vlan create 4
SWITCH(bridge)# vlan del default 2-4
SWITCH(bridge)# vlan add 2 2 untagged
SWITCH(bridge)# vlan add 3 3 untagged
SWITCH(bridge)# vlan add 4 4 untagged
SWITCH(bridge)# vlan pvid 2 2
SWITCH(bridge)# vlan pvid 3 3
SWITCH(bridge)# vlan pvid 4 4
SWITCH(bridge)# show vlan
u: untagged port, t: tagged port
-----------------------------------------------------------------