Siemens S223 - Manual (Page 79)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 79
Otherwise, to clear all recorded statistics of port and initiate, use the following command.
Command Mode Description
clear port statistics {PORTS | all}
Enable
Global
Bridge Clears all recorded port statistics.
5.2.7.2 The CPU statistics
To display CPU statistics of Ethernet port, use the following command.
Command Mode Description
show cpu statistics avg-pkt
[PORTS]
Shows cpu traffic statistics of average packet for a
specified Ethernet port.
show cpu statistics total
[PORTS]
Enable
Global
Bridge
Shows cpu traffic statistics of Interface group for a
specified Ethernet port.
To delete all CPU statistics of specified Ethernet port, use the following command.
Command Mode Description
clear cpu statistics [PORTS ]
Global
Bridge
Deletes all CPU statistics for an Ethernet port.
5.2.7.3 The Protocol statistics
To enable/disable protocol statistics
Command Mode Description
protocol statistics {enable | dis-
able } [{arp | icmp | ip | tcp |
udp }]
Global
Bridge
To display protocols’ statistics of Ethernet port, use the following command.
Command Mode Description
show protocol statistics avg-pkt
[PORTS]
Shows protocols (arp, icmp, ip, tcp, udp) statistics of
average packet for a specified Ethernet port.
show protocol statistics total
[PORTS]
Enable
Global
Bridge
Shows protocols (arp, icmp, ip, tcp, udp) statistics of
Interface group for a specified Ethernet port.
To delete all protocol statistics of specified Ethernet port, use the following command.
Command Mode Description
clear protocol statistics
[PORTS ]
Global
Bridge
Deletes all protocols statistics for an Ethernet port.