beautypg.com

2 enabling transmission of candidate rp message – Siemens S223 User Manual

Page 309

background image

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

A50010-Y3-C150-2-7619 309

decide which IP address to be used as candidate-RP. This command is used to statically
configure the RP address for multicast groups.

To configure IP address to be used in candidate-RP, use the following command.

Command Mode

Description

ip pim rp-address A.B.C.D

[<1-

99> | <1300-1999>] [override]

Global

Configures RP address for multicast groups statically.
A.B.C.D: IP address
1-99: IP standard access list
1300-1999: IP standard access list (expanded range)
override: override dynamically RP mappings

If RP-address configured through BSR and RP-address configured statically are both

available for a group range, the RP-address configured through BSR is chosen.

If multiple static-RPs are available for a group range, then one with the highest IP

address

is

chosen.

To delete configured IP address, use the following command.

Command Mode

Description

no ip pim rp-address A.B.C.D

Global

Deletes configured IP address.

9.3.4.2

Enabling Transmission of Candidate RP Message

Use this command to give the router the candidate RP status using the IP address of the
specified interface.

Command Mode

Description

ip pim rp-candidate INTERFACE

[group-list <1-99>] [interval <1-
16383>] [priority <0-255>]

Global

Configures a message for a candidate RP.
INTERFACE: interface name
1-99: IP standard access list
1-16383: advertisement interval (unit: second)
0-255: priority value

To delete configured priority of candidate-RP, use the following command.

Command Mode

Description

no ip pim rp-candidate

Unconfigures the entire setting of candidate-RP.

no ip pim rp-candidate

INTERFACE

no ip pim rp-candidate

INTERFACE

group-list

<1-99>

Global

Deletes the setting of candidate-RP of specific inter-
face.

This manual is related to the following products: