Siemens S223 - Manual (Page 291)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 291
To disable IGMP snooping fast-leave, use the following command.
Command Mode Description
no ip igmp snooping immediate-
leave
Deletes the fast-leave.
no ip igmp snooping vlan VLAN-
ID immediate-leave
Global
Deletes the fast-leave on a VLAN interface.
To display IGMP snooping Immediate Leave configuration, use the following command.
Command Mode Description
show ip igmp snooping [vlan
VLANS ]
Enable
Global
Bridge
Shows that the IGMP snooping Immediate leave is
enabled.
9.2.5.2 IGMP v2 Snooping Querier
You can use the hiD 6615 S223/S323 as IGMP querier without multicast router, because
IGMP query daemon has been installed in the hiD 6615 S223/S323. Legacy equipments
used IGMP Querier of PIM but not developed Querier for IGMP Snooping. Because of
this, to operate Querier on IGMP Snooping, IP Address was mandatory and Specific
Query was operated by IGMP Querier.
The hiD 6615 S223/S323 implemented IGMP Snooping Querier and it operates differently
with IGMP Query. IGMP Snooping Querier can send General Query from Snooping
Switch and it should be distinguished with Specific Query. IGMP Snooping Querier also
uses Source IP Address 0.0.0.0, if there is no IP Address on Switch.
Enabling IGMP Snooping Querier
To enable the IGMP Snooping querier, use the following command.
Command Mode Description
ip igmp snooping querier ad-
dress A.B.C.D
Enables the IGMP snooping querier on the system.
A.B.C.D: Source address for IGMP v2 snooping querier
ip igmp snooping vlan VLANS
querier address A.B.C.D
Global Enables the IGMP snooping querier on a VLAN inter-
face.
VLANS: VLAN ID
To disable IGMP querier, use the following command.
Command Mode Description
no ip igmp snooping querier
address
Disables the IGMP snooping querier.
no ip igmp snooping vlan VLAN-
NAME querier address
Global
Disables the IGMP snooping querier on a VLAN inter-
face.