Siemens S223 - Manual (Page 143)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 143
7.6.2.4 Rule Action
To specify a rule action (match) for the packets matching configured classifying patterns,
use the following command.
Command Mode Description
match deny Denies a packet.
match permit Permits a packet.
match redirect PORT
Redirects to specified egress port:
PORT: uplink port number
match mirror Sends a copy to mirror monitoring port.
match dscp <0-63> Changes DSCP field, enter DSCP value.
match cos <0-7>
Changes 802.1p class of service, enter CoS value.
0-7: CoS value
match cos <0-7> overwrite
Overwrites 802.1p CoS field in the packet.
0-7: CoS value
match cos same-as-tos
overwrite
Overwrites 802.1p CoS field in the packet same as IP
ToS precedence bits.
match ip-prec <0-7>
Changes IP ToS precedence bits in the packet.
0-7: ToS precedence value
match ip-prec same-as-cos
Changes IP ToS precedence bits in the packet, same
as 802.1p CoS value.
match bandwidth BANDWIDTH Determines maximum allowed bandwidth (Mbps).
match vlan <1-4094>
Specifies matched-packet VLAN ID
1-4094: VLAN ID
match copy-to-cpu Copies to CPU.
match counter
Counts how many times the packets come into config-
ured Rule.
match egress filter PORT Deletes a specified egress port.
match egress port PORT
Rule
Overwrites a specified egress port