beautypg.com

4 creating available static route only for rip, 5 redistributing routing information, Creating available static route only for rip – Siemens S223 User Manual

Page 364: Redistributing routing information

background image

UMN:CLI User Manual

SURPASS hiD 6615 S223/S323 R1.5

364 A50010-Y3-C150-2-7619

Command Mode

Description

ip rip receive version 1

Receives RIP v1 type packet only from the interface.

ip rip receive version 2

Receives RIP v2 type packet only from the interface.

ip rip receive version 1 2

Interface

Receives both RIP v1 and RIP v2 type packets from
the interface.

To delete the configuration that receives RIP version packet from the interface, use the
following command.

Command Mode

Description

no ip rip receive version 1

Deletes the configuration of RIP v1 type packet for
helping them be received from the interface.

no ip rip receive version 2

Deletes the configuration of RIP v2 type packet for
helping them to be received from interface.

no ip rip receive version 1 2

Interface

Deletes the configuration of both RIP v1 and RIP v2
type packets for helping them to be received from the
interface.

10.3.4

Creating available Static Route only for RIP

This feature is provided only by Siemens’ route command creates static route available
only for RIP. If you are not familiar with RIP protocol, you would better use redistribute
static

command.

Command Mode

Description

route

A.B.C.D/M

Creates suitable static route within RIP environment
only.
A.B.C.D/M: IP prefix

no route

A.B.C.D/M

Router

Deletes this static route established by route com-
mand.

10.3.5 Redistributing

Routing Information

The hiD 6615 S323 can redistribute the routing information from a source route entry into
the RIP tables. For example, you can instruct the router to re-advertise connected, kernel,
or static routes as well as other routes established by routing protocol. This capability ap-
plies to all the IP-based routing protocols.

To redistribute routing information from a source route entry into the RIP table, use the
following command.

This manual is related to the following products: