beautypg.com

1 igmp v2 snooping fast leave, Fig. 9.4, Ip multicasting – Siemens S223 User Manual

Page 290

background image

UMN:CLI User Manual

SURPASS hiD 6615 S223/S323 R1.5

290 A50010-Y3-C150-2-7619

Multicast Packet

Multicast Router

hiX 5430

1. Request the
Multicast Packet

2. Transmit the Multicast packet to

the port that send join massage

Multicast Join request

Multicast Packet

Fig. 9.4

IP Multicasting

IGMP Snooping is a function that finds port, which sends「Join message」to join in
specific multicast group to receive multicast packet or「Leave message」to get out of
the multicast group because it does not need packets.

Only when the switch is connected to multicast router, IGMP Snooping can be enabled.

9.2.5.1

IGMP v2 Snooping Fast Leave

If the Multicast client sends the leave massage to leave out Multicast group, Multicast
router sends IGMP Query massage to the client again, and when the client does not re-
spond, delete the client from the Multicast group.

In IGMP v2, even after Host sent Leave Message, it receives Multicast Traffic until send-
ing Specific Query. In Snooping Fast-Leave Enable mode, it sends no more Multicast
Traffic immediately by deleting from Membership Table when receive Leave Message
without sending Specific Query.

Command Mode

Description

ip igmp snooping immediate-

leave

Configures the fast-leave on the system.

ip igmp snooping vlan

VLANS

immediate-leave

Global

Configures the fast-leave on a VLAN interface.

This manual is related to the following products: