Siemens S223 - Manual (Page 229)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 229
8.4.1.2 Access to Associated IP Address
If you configure the function of accessing Associated IP address, you can access to As-
sociated IP address by the commands such as ping.
To configure the function of accessing Associated IP address, use the following command.
Command Mode Description
vip-access [enable | disable] VRRP
Configures the function of accessing associated IP
address.
8.4.1.3 Master Router and Backup Router
The hiD 6615 S323 can be configured as Master Router and Backup Router by compar-
ing Priority and IP address of devices in Virtual Router. First of all, it compares Priority. A
device, which has higher Priority, is to be higher precedence. And when devices have
same Priority, then it compares IP address. A device, which has lower IP address, is to be
higher precedence. If a problem occurs on Master Router and there are more than two
routers, one of them is selected as new Master Router according to their precedence.
To configure Priority of Virtual Router or delete the configuration, use the following com-
mands.
Command Mode Description
vr-priority <1-254> Configures Priority of Virtual Router.
no vr-priority
VRRP
Deletes configured Priority of Virtual Router.
Priority of Virtual Backup Router can be configured from 1 to 254.
To set VRRP timers or delete the configuration, use the following command.
Command Mode Description
vr-timers advertisement <1-10>
Sets VRRP timers.
1-10: advertisement time in the unit of second
no vr-timers advertisement
VRRP
Clears a configured VRRP time.
i