Siemens S223 - Manual (Page 246)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
246 A50010-Y3-C150-2-7619
The following is an example of displaying DHCP packet statistics.
SWITCH(config)# show ip dhcp server statistics
===========================================
Message Recieved/Error(0/0)
-------------------------------------------
DHCP DISCOVER 0
DHCP REQUEST 0
DHCP DECLINE 0
DHCP RELEASE 0
DHCP INFORM 0
=========================================
Message Sent/Error(0/0)
-----------------------------------------
DHCP OFFER 0
DHCP ACK 0
DHCP NAK 0
SWITCH(config)#
8.8.1.17 Displaying DHCP Pool Configuration
To display a DHCP pool configuration, use the following command.
Command Mode Description
show ip dhcp pool [POOL] Shows a DHCP pool configuration.
show ip dhcp pool summary
[POOL]
Enable
Global
Bridge Shows a summary of a DHCP pool configuration.
POOL: pool name
The following is an example of displaying a DHCP pool configuration.
SWITCH(config)# show ip dhcp pool summary
[Total -- 1 Pools]
Total 0 0.00 of total
Available 0 0.00 of total
Abandon 0 0.00 of total
Bound 0 0.00 of total
Offered 0 0.00 of total
Fixed 0 0.00 of total
[sample]
Total 0 0.00% of the pool 0.00 of total
Available 0 0.00% of the pool 0.00 of total
Abandon 0 0.00% of the pool 0.00 of total
Bound 0 0.00% of the pool 0.00 of total
Offered 0 0.00% of the pool 0.00 of total
Fixed 0 0.00% of the pool 0.00 of total
SWITCH(config)#