Siemens S223 - Manual (Page 292)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
292 A50010-Y3-C150-2-7619
The Query Interval of IGMP v2 Snooping Querier
To configure a query interval of the querier, use the following command.
Command Mode Description
ip igmp snooping querier query-
interval <1-1800>
Configures the IGMP snooping querier query interval
on the system.
1-1800: IGMP snooping querier query interval in sec-
onds
ip igmp snooping vlan VLANS
querier query-interval <1-1800>
Global
Enables the IGMP snooping querier on a VLAN inter-
face.
VLANS: VLAN ID
To disable the query interval of the querier, use the following command.
Command Mode Description
no ip igmp snooping querier
query-interval
Disables the IGMP snooping querier interval.
no ip igmp snooping vlan
VLANS querier query-interval
Global
Disables the IGMP snooping querier interval on a
VLAN interface.
The Timeout Value of IGMP v2 Snooping Querier’s General Query
Use this following command to configure the max response time in which the reply for the
IGMP snooping query being sent should be received.
Command Mode Description
ip igmp snooping querier max-
response-time <1-25>
Configures the IGMP snooping max-response-time
interval on the system.
1-25: The maximum response time in seconds
ip igmp snooping vlan VLANS
querier max-response-time <1-
25>
Global
Enables the IGMP snooping max-response-time on a
VLAN interface.
VLANS: VLAN ID
To disable the max-response-time, use the following command.
Command Mode Description
no ip igmp snooping querier
max-response-time
Disables the IGMP snooping max-response-time inter-
val.
no ip igmp snooping vlan
VLANS querier max-response-
time
Global
Disables the IGMP snooping max-response-time on a
VLAN interface.