Siemens S223 User Manual
Page 122
UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
122 A50010-Y3-C150-2-7619
The following is to configure to enable OAM loopback function through 25 port of the
switch and operate once.
SWITCH(bridge)# oam local admin enable 25
SWITCH(bridge)# oam remote loopback enable 25
SWITCH(bridge)# show oam local 25
LOCAL PORT[25]
-------------------------------------------
item
|
value
-------------------------------------------
admin
|
ENABLE
mode
|
ACTIVE
mux action
|
FORWARD
par action
|
DISCARD
variable
|
UNSUPPORT
link event
|
UNSUPPORT
loopback
|
SUPPORT(disable)
uni-direction
|
UNSUPPORT(disable)
-------------------------------------------
SWITCH(bridge)# show oam remote 25
REMOTE PORT[25]
-------------------------------------------
item
|
value
-------------------------------------------
mode
|
ACTIVE
MAC address
|
00:d0:cb:27:00:94
variable
|
UNSUPPORT
link event
|
UNSUPPORT
loopback
|
SUPPORT(enable)
uni-direction
|
UNSUPPORT
-------------------------------------------
SWITCH(bridge)# oam remote loopback start 25
PORT[25]: The remote DTE loopback is success.
SWITCH(bridge)#