Siemens S223 - Manual (Page 343)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 343
10.2.6.2 Default Cost of Area
The default cost of Area is configured only in ABR. ABR function is for delivering the
summary default route to stub area or NSSA, in that cases the default cost of area must
be required. However, ABR which does not have stub area or NSSA can not use the fol-
lowing command.
To configure a default cost of Area, use the following command.
Command Mode Description
area <0-4294967295> default-
cost <1-16777215>
Router Configures a default cost of Area.
To delete a configured default cost of Area, use the following command.
Command Mode Description
area <0-4294967295> default-
cost <1-16777215>
Router Deletes a configured default cost of Area.
This command is only for ABR which is delivering summary default route to stub or NSSA.
10.2.6.3 Blocking the Transmission of Routing Information Between Area
ABR transmits routing information between Areas. In case of not to transmit router infor-
mation to other area, the hiD 6615 S323 can configure it as a blocking.
First of all, use the access-list or prefix-list command to assign LIST-NAME. And use
the following command to block the routing information on LIST-NAME. This configuration
only available in case of OSPF router is ABR.
To block routing information on LIST-NAME, use the following command.
Command Mode Description
area <0-4294967295> filter-list
access LIST-NAME {in | out}
area <0-4294967295> filter-list
prefix LIST-NAME {in | out}
Router Blocks routing information on LIST-NAME.
To delete configured blocking information, use the following command.
Command Mode Description
no area <0-4294967295> filter-
list access LIST-NAME {in | out}
no area <0-4294967295> filter-
list prefix LIST-NAME {in | out}
Router Deletes configured blocking information.
This command is only available for ABR.
!
!