Siemens S223 - Manual (Page 358)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
358 A50010-Y3-C150-2-7619
To display the interface information of OSPF, use the following command.
Command Mode Description
show ip ospf interface [INTERFACE]
Enable
Global
Shows the interface information of
OSPF.
To display the information of neighbor route, use the following command.
Command Mode Description
show ip ospf neighbor
show ip ospf neighbor A.B.C.D [detail]
show ip ospf neighbor interface A.B.C.D
show ip ospf neighbor detail [all]
show ip ospf neighbor all
Enable
Global
Shows the information of neighbor
router.
To display the routing information which is registered in routing table, use the following
command.
Command Mode Description
show ip ospf route
Enable
Global
Shows the routing information which is registered in
routing table.
To display the information of virtual link, use the following command.
Command Mode Description
show ip ospf virtual-links
Enable
Global
Shows the information of virtual link.