beautypg.com

2 displaying debugging information, 3 limiting number of database – Siemens S223 User Manual

Page 359

background image

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

A50010-Y3-C150-2-7619 359

10.2.18.2 Displaying

Debugging

Information

The hiD 6615 S323 uses debug command to find the reason of problem. Use the follow-
ing command.

Command Mode

Description

debug ospf all

Shows all the debugging information.

debug ospf events

[abr | asbr |

lsa

| nssa | os | router | vlink]

Shows information about OSPF operation such as
OSPF neighbor router, transmitted information, decid-
ing destination router, calculating the shortest route,
and so on.

debug ospf ifsm

[events | status

| timers]

Shows the debugging information of OSPF interface.

debug ospf lsa

[flooding | gen-

erate

| refresh]

Shows information transmitted by OSPF and calculat-
ing the shortest route.

debug ospf nfsm

[events | status

| timers]

Shows the debugging information of OSPF Neighbor
router.

debug ospf nsm

[events | status

| timers]

Shows the debugging information between OSPF
process and NSM (Network Services Module).

debug ospf packet

{hello | dd |

ls-ack

| ls-request | ls-update |

all

} [send | recv [detail]]

Shows the debugging information of each packet.

debug ospf route

[ase | ia | in-

stall

| spf]

Enable

Shows the debugging information of OSPF routing.

To display the debugging information, use the following command.

Command Mode

Description

show debugging ospf

Enable

Global

Shows the debugging information of OSPF.

10.2.18.3

Limiting Number of Database

The hiD 6615 S323 can limit the Number of Database to process in OSPF. For example,
if a router connected with many of routers, it carries overload to process the database.
Therefore, Limiting the Number of Database reduces the overload on system.

To configure the limiting Number of Database, use the following command.

Command Mode

Description

max-concurrent-dd

<1-65535>

Router

Configures the limiting Number of Database.

To delete the configuration, use the following command.

Command Mode

Description

no max-concurrent-dd

<1-65535>

Router

Deletes the configuration.

This manual is related to the following products: