Siemens S223 - Manual (Page 161)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 161
To disable the configuration of port secure aging, use the following command.
Command Mode Description
no port security PORTS aging
static
Disables aging for only statistically configured secure
addresses.
no port security PORTS aging
time
Disables port secure aging for all secure addresses on
a port.
no port security PORTS aging
type
Bridge
Returns to the default condition. (absolute)
To display the configuration of port security, use the following command.
Command Mode Description
show port security [PORTS]
Enable
Global
Bridge Shows port security on the port.
7.11 MAC Table
A dynamic MAC address is automatically registered in the MAC table, and it is removed if
there is no access to/from the network element corresponding to the MAC address during
the specified MAC aging time. On the other hand, a static MAC address is manually reg-
istered by user. This will not removed regardless of the MAC aging time before removing
it manually.
To manage MAC table in the switch, use the following command.
Command Mode Description
mac NAME PORT MACADDR
Specifies a static MAC address in the MAC table.
NAME: enter the bridge name.
PORT: enter the port number.
MACADDR: enter the MAC address.
mac aging-time <10-21474830>
Bridge
Specifies MAC aging time:
10-21474830: aging time (default: 300)