Yaskawa MotionWorks IEC User Manual
Page 347

PLCopenPlus Function Blocks for Motion Control 2013-04-13
339
8470
ExceededMaxTypeCount
A user log item can only support eight inputs for each
type.
8471
SaveLogFailed
Saving the log failed.
Communication Errors
8705
MaxUserFDLimit
Exceeded maximum number of open user IO devices
8706
InvalidUserFDHandle
Invalid user IO device handle
8707
InvalidMasterSlave
Invalid IP address
8708
SocketCreateFailed
Socket initialization failed
8709
AddressInUse
The address is already in use on the local network
8710
AddressUnavailable
Address Unavailable
8711
AcceptFailed
Accept Connection Failed
8712
BindFailed
Bind Failed
8713
InvalidSocketType
Invalid Socket Type
8714
InvalidBindAddress
Invalid Bind Address
8715
ConnectSocketFailed
Connecting to the socket failed
8716
AddressUnreachable
The remote IP address is unreachable. Check the
default gateway
8717
SocketAlreadyConnected
The socket is already connected
8718
ConnectionRefused
The connection was refused by the remote device
8719
SocketNotConnected
No TCP socket is connected
8720
DeviceOptionError
Device Option Error
8721
DeviceReadFailed
Reading from the comm device has failed
8722
DeviceWriteFailed
Device Writing has failed
8723
InvalidDeviceIOBuffer
Invalid Device IO Buffer
8724
InvalidDeviceOptionID
Invalid Device Option ID
8725
InvalidDeviceOptionValue
An option specified for the device is invalid
8726
InvalidSerialPort
The serial port specified is invalid
8727
SerialPortOpenFailed
The serial port specified could not be opened
Axis Errors
40960
ServoPackAlarms
RESERVED
45332
ClearAlarmsFailed
Sending clear alarms command to servo drive failed.
45333
MechatrolinkResetFailed
45334
MechatrolinkResetProhibited
Function cannot be utilized if there is a servo enabled
or in motion on the network.
45335
AbsoluteEncoderInitializationFailed
Failed to initialize absolute encoder.
45336
DownloadInProgress
Function block could not be executed because a
program download was in progress.
44337
Rebooting the controller is prohibited
Rebooting the controller is prohibited while an axis is