Yaskawa MotionWorks IEC - Manual (Page 329)

PLCopenPlus Function Blocks for Motion Control 2013-04-13 321
app 340C 1129 Y_VerifyParmeters and Y_WriteParameters can not be
called a second time while the first one is in progress.
app 340C 1210 All error codes for structures are in the range from 0x1211
to 0x121f.
app 340C 1211 Axis ID does not correspond to an axis.
app 340C 1212 The master slave relationship is not defined.
app 340C 1213 The input reference does not correspond to a real input
app 340C 1214 The output reference does not correspond to a real
output.
app 340C 1215 The input/output number does not correspond to a real
input or output bit.
app 340C 1216 Trigger reference is not valid.
app 340C 1217 The cam switch structure is not valid.
app 340C 1218 The track structure is not valid.
app 340C 1219 Table size results in misaligned data.
app 340C 121A Buffer size results in misaligned data.
app 340C 121B Table type is not supported.
app 340C 121C Invalid start index.
app 340C 121D Invalid end index.
app 340C 1220 All error codes for invalid enumeration values are in the
range from 0x1221 to 0x122f.
app 340C 1221 'BufferMode' does not correspond to a valid enumeration
value.
app 340C 1222 'Direction' does not correspond to a valid enumeration
value.
app 340C 1223 'StartMode' does not correspond to a valid enumeration
value.
app 340C 1224 'ShiftMode' does not correspond to a valid enumeration
value.
app 340C 1225 'OffsetMode' does not correspond to a valid enumeration
value.
app 340C 1226 'Mode' does not correspond to a valid enumeration value.
app 340C 1227 'SynchMode' does not correspond to a valid enumeration
value.
app 340C 1228 'Parameter' does not correspond to a valid enumeration
value.
app 340C 1229 'AdjustMode' does not correspond to a valid enumeration
value.
app 340C 122A 'RampIn' does not correspond to a valid enumeration
value.