Yaskawa MotionWorks IEC - Manual (Page 326)

PLCopenPlus Function Blocks for Motion Control 2013-04-13 318
app 340C 012A Internal PLC Error: Error in retain data configuration.
app 340C 012B Internal PLC Error: Floating point error.
app 340C 012C Internal PLC Error: Fatal error.
app 340C 012D Output string is too short.
app 340C 012E Input string is too short.
app 340C 012F Invalid input parameter 'p' or 'l' (position or length).
app 340C 0130 String is identical to the output string.
app 340C 0131 Invalid string comparison.
app 340C 0132 Invalid data type for string conversion.
app 340C 0133 Error in format string.
app 340C 0134 Error during string conversion.
app 340C 0135 Error in I/O configuration.
app 340C 0136 Initializing I/O driver failed.
app 340C 0137 Board not instantiated.
app 340C 0138 Board number not allowed.
app 340C 0139 Input Group doesn't fit.
app 340C 013A Output Group doesn't fit.
app 340C 013B Board not found.
app 340C 013C Error reading inputs.
app 340C 013D Error writing outputs.
app 340C 013E Error creating I/O semaphore.
app 340C 013F Invalid memory size.
app 340C 0140 Invalid I/O memory address.
app 340C 0141 Internal PLC Error: PG defined more than once.
app 340C 0142 POU exceeds 64K module size during insertion. POU size
must be reduced.
app 340C 0143 Internal PLC Error: Error in task configuration.
app 340C 0143 Unknown I/O Driver.
app 340C 0200 Common causes of invalid configuration include duplicate
t2o/o2t assembly instances or invalid client connection
parameters.
app 340C 0202 Unable to connect to the EtherNet/IP remote server.
Common causes include: invalid remote server address,
invalid gateway, invalid subnet mask, or the Ethernet
network is not correctly configured.
app 340C 0203 There is no route to the EtherNet/IP server. Common
causes include: invalid remote server address, invalid
gateway, invalid subnet mask, or the Ethernet network is
not correctly configured.