HEIDENHAIN SW 548328-05 DIN Programming - Manual (Page 530)

530
TURN PLUS
7.
1 TURN PLUS mode of oper
a
tion
7.1 TURN PLUS mode of operation
To create programs with TURN PLUS, you program the blank and
finished part with the aid of interactive graphics. The working plan is
then generated automatically. As a result you get a commented and
structured NC program.
With TURN PLUS you can create NC programs for the following
applications:
 Turning operations
 Drilling and milling with the C axis
 Drilling and milling with the Y axis
TURN PLUS concept
The workpiece description is the basis for working plan generation.
The strategy for generating the working plan is specified in the
machining sequence.
The machining parameters define details of
machining. This allows you to adapt TURN PLUS to your individual
needs.
TURN PLUS generates the working plan, which takes technology
attributes such as oversizes, tolerances, etc. into account.
On the basis of the blank form update, TURN PLUS optimizes the
paths for approach and avoids air cuts or collisions between workpiece
and cutting edge.
TURN PLUS uses the current turret assignment for the tool selection.
If there is no suitable tool in the turret assignment, TURN PLUS looks
for a suitable tool in the tool database.
When clamping the workpiece, TURN PLUS determines the cutting
limitations and the zero point shift for the NC program.
The technology database provides the cutting data to TURN PLUS.
TURN PLUS
Machining
Sequence
Machining
Parameters
Technology
Database
Chucking Equipment
Database
Tool
Database
Databases
Workpiece
Description
Automatic
Working Plan
Generation
NC
Program