HEIDENHAIN SW 548328-05 DIN Programming - Manual (Page 193)

HEIDENHAIN MANUALplus 620, CNC PILOT 620/640
193
4.1 Pr
ogr
amming in DIN/ISO mode
"Geometry" pull-down menus
The Geo(metry) pull-down menus contain functions for contour
description. The pull-down menus are called by pressing the "Geo"
menu in DIN/ISO mode.
Overview of the functions:
 G
: Direct entry of a G function
 Line
: Direct entry of a line segment G1
 Circle : Description of a circular arc (G2, G3, G12, G13)
 Form : Description of form elements
 Front : Functions for contour descriptions on the front face
 Surface : Functions for contour descriptions on the lateral surface
 ICP, Extras, Graph.: See "Shared menu items" on page 40.
 Back to the DIN/ISO main menu
"Machining" pull-down menus
The "Mach (ining)" pull-down menus contain functions for
programming the machining operation. The pull-down menus are
called by pressing the "Mach" menu in DIN/ISO mode.
Overview of the functions:
 G
: Direct entry of a G function
 G menu
: Pull-down menus for machining tasks
 M
: Direct entry of an M function
 M menu : Pull-down menus for switching tasks
 T : Direct tool call
 F : Feed per revolution G95
 S
: Cutting speed G96
 Extras, Graph.: See "Shared menu items" on page 40.
 Back to the DIN/ISO main menu