HEIDENHAIN SW 548328-05 DIN Programming - Manual (Page 387)

HEIDENHAIN MANUALplus 620, CNC PILOT 620/640
387
4.30 D
a
ta input and data output
4.30 Data input and data output
"WINDOW"—Output window for variables
WINDOW (x) opens an output window with x lines. The window is
opened as a result of the first input/output. WINDOW (0) closes the
window.
The standard window comprises 3 lines. You do not need to program
it.
"WINDOW"—Output file for variables
The command WINDOW (x,"filename") saves the PRINT instruction in
a file with the defined name and the extension .LOG, in the directory
"V:\nc_prog\". The file is overwritten when the WINDOW command is
run again.
"INPUT"—Input of variables
Use INPUT to program the input of variables.
You define the input text and the number of the variable. The Control
stops the interpretation at INPUT, outputs the text and waits for input
of the variable value.
The Control displays the input after having completed the INPUT
command.
Example:
. . .
N 1 WINDOW(8)
N 2 INPUT("query: ",#l1)
N 3 #l2=17*#l1
N 4 PRINT("result: ",#l1,"*17 = ",#l2)
. . .
Syntax:
WINDOW(line number) (0 <= line number <= 20)
Example:
. . .
N 1 WINDOW(8)
N 2 INPUT("query: ",#l1)
N 3 #l2=17*#l1
N 4 PRINT("result: ",#l1,"*17 = ",#l2)
. . .
Syntax:
WINDOW (line number, "filename")
Syntax:
INPUT("text",variable)