HEIDENHAIN SW 548328-05 DIN Programming - Manual (Page 2)

smart.Turn and DIN PLUS
programming
This manual describes functions and features provided by lathe
controls as of the following NC software numbers.
The suffix E indicates the export version of the control. The export
version of the control has the following limitations:
 Simultaneous linear movement in up to 4 axes
HEROS 5
identifies the new operating system of HSCI-based controls.
Machine operation and cycle programming are described in the
MANUALplus 620 (ID 634864-xx) and CNC PILOT 620/640 (ID
730870-xx) User's Manuals. Please contact HEIDENHAIN if you
require a copy of one of these manuals.
The machine manufacturer adapts the features offered by the control
to the capabilities of the specific machine tool by setting machine
parameters. Therefore, some of the functions described in this manual
may not be among the features provided by the Control on your
machine tool.
Some of the Control functions which are not available on every
machine are:
 Positioning of spindle (M19) and driven tool
 Operations with the C or Y axis
Please contact your machine manufacturer for detailed information on
the features that are supported by your machine tool.
Many machine manufacturers and HEIDENHAIN offer programming
courses. We recommend these courses as an effective way of
improving your programming skill and sharing information and ideas
with other Control users.
Control NC software number
MANUALplus 620E 548328-05
MANUALplus 620 (HEROS 5) 548430-01
MANUALplus 620E (HEROS 5) 548431-01
CNC PILOT 620E 688945-03
CNC PILOT 640 (HEROS 5) 688946-01
CNC PILOT 640E (HEROS 5) 688947-01