Adept AdeptSight User Guide - Manual (Page 80)

AdeptSight Camera Calibration Interview Wizard
If you chose to select the calibration options from a list, you will be presented a screen similar
to the following:
Specifying Calibration Options from a List
1. Specify how the camera is mounted.
2. Specify whether a conveyor belt is to be used.
3. Specify if the calibration object is attached to the robot tool, or picked or
pointed to.
4. Specify whether the robot can pick an object or point to an object.
5. Specify if there are obstacles within the workspace that must be
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 80