Adept AdeptSight User Guide - Manual (Page 283)

The available modes are:
Mode Description
Dark To Light The Arc Finder searches only for arcs occurring at
a dark to light transition in grey-level values.
Light To Dark The Arc Finder searches only for arcs occurring at
a light to dark transition in grey-level values.
Either The Arc Finder searches only for arcs occurring
either at a light to dark or dark to light transition
in grey-level values. This mode will increase proc-
essing time.
Don’t Care The Arc Finder searches only for arcs occurring at
any transition in grey-level values including rever-
sals in contrast, for example on an unevenly col-
ored background.
Search Mode
Search Mode specifies the mode used by the tool to generate and select a hypothesis.
The available modes are:
Mode Description
Best Arc Selects the best arc according to hypotheses
strengths. This mode will increase processing
time.
Arc Closest To Guideline Selects the arc hypothesis closest to the Guide-
line.
Arc Closest To Inside Selects the arc hypothesis closest to the inside of
the tool Arc (closest to the tool center).
Arc Closest To Outside Selects the arc hypothesis closest to the outside of
the tool Arc (farthest to the tool center).
Region of Interest (ROI)
Most tool position parameters can be set through the Region of Interest section of the tool
interface. The following are the parameters that define the tool region of interest:
Object Definition
Opening Angle between the two bounding radii of the tool
sector.
Properties
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 283