Adept AdeptSight User Guide - Manual (Page 522)

Configuration
Configuration
Object Definition
Properties
Polarity Mode Selects the type of polarity accepted for finding a
line. Polarity identifies the change in grey-level
values in the positive direction along the tool X
axis.
Search Mode Specifies the method used by the tool to select a
hypothesis.
Show Results Graphics Specifies if the graphics are drawn in the Vision
Window.
Tool Links
Image Source Defines the image source used for processing by
this vision tool.
Region of Interest (ROI)
Guideline Offset Defines the offset, from the center of the region of
interest, for the guideline.
Offset Specifies the center and rotation of the ROI. X, Y,
Degrees.
Relative To Specifies the tool that will provide the input to this
tool. The tool can be dragged from the Folder pane
and dropped into this field.
Search Area Defines the height and width of the region of inter-
est.
Advanced Properties
Connectivity Specifies the minimum number of connected
edges required to generate a point hypothesis.
Contrast Threshold Defines the minimum contrast needed for an edge
to be detected in the input image.
Interpolate Position Mode Sets the mode used by the Point Finder to com-
pute a point hypothesis
Positioning Level Sets the configurable effort level of the entity-posi-
tioning process.
Subsampling Level Set the subsampling level used to detect edges
that are used by the tool to generate hypotheses.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 522