Adept AdeptSight User Guide - Manual (Page 419)

l
Some operations require a constant as a second operation. This constant must be
defined in the Advanced Parameters section of the tool interface.
l
The Operand Image must be set to None (displays as an empty field) if a constant
must be applied as an operand. Otherwise any selected Operand Image will override
the selected constant.
Modes of Operation
The selected Operation corresponds to the process that will be applied to the input image by
the Image Processing Tool. Each Image Processing Tool can apply a single operation.
Once an operation is selected, parameters related to the operation such as clipping, scale, con-
stant (operand), and others, must be configured in the Properties section. This section will
change its label depending on the type of properties (logical, filtering, etc.).
The following table provides a list and short description of the available operations. For more
information on a specific operation, see the Configuring Image Processing Properties on page
423 section.
Object Definition
Arithmetic Properties
Arithmetic Addition Operand value (constant or Operand Image pixel)
is added to the corresponding pixel in the input
image.
Arithmetic Subtraction Operand value (constant or Operand Image pixel)
is subtracted from the corresponding pixel in the
input image.
Arithmetic Multiplication The input image pixel value is multiplied by the
Operand value (constant or corresponding Oper-
and Image pixel).
Arithmetic Division The input image pixel value is divided by the Oper-
and value (constant or corresponding Operand
image pixel). The result is scaled and clipped, and
finally written to the output image.
Arithmetic Lightest The Operand value (constant or Operand Image
pixel) and corresponding pixel in the input image
are compared to find the maximal value.
Arithmetic Darkest The Operand value (constant or Operand Image
pixel) and corresponding pixel in the input image
are compared to find the minimal value.
List of Available Operations
Modes of Operation
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 419