Adept AdeptSight User Guide User Manual
Page 170
AdeptSight Camera Calibration Wizard - Manual, Upward-looking
Edit Window
l
Click Accept, then click Next.
You will move the robot (and target) to a minimum of four points. These should be close to
the four corners of the camera field of view for best accuracy.
The following steps are repeated for n = 1 through 4:
l
Define Calibration Point n
1. Move the robot in X and Y only, so the part is moved in the field of view.
2. Click Here.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 170