Adept AdeptSight User Guide - Manual (Page 204)

Adding a Camera to the Workspace
A camera is added to the AdeptSight workspace and the corresponding object editor
opens:
NOTE: The AdeptSight software opens the object editor for the tab that is high-
lighted.
Object Editor for Basler Pylon Device
3. You will be asked if you want to calibrate the camera now or later.
Camera Calibration Now or Later
4. In Emulation Mode, you will be asked where you want the images to come from.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 204