Adept AdeptSight User Guide - Manual (Page 63)

Launching the Grid Calibration
You will need a grid of dots for this calibration. Refer to Standalone Camera Calibration
on page 207.
l
Select the encoder
The SmartController's only required connection with a conveyor belt is the belt's
encoder. In some installations, the controller will have control over belt motion.
Selecting the Encoder
l Turn on power
l Teach Picture-taking Position
l
Teach the Vision tool
l
Interview completed
Procedure
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 63