Configuration – Adept AdeptSight User Guide User Manual
Page 242
Configuration
Configuration
Basic steps for configuring an Arc Caliper
1. Select the tool that will provide input images.
2. Position the Arc Caliper tool.
3. Configure Pair Settings for each edge pair. See Configuring Arc Caliper Properties on
4. Test and verify results. See Arc Caliper Results on page 257
5. Configure Advanced properties if required. See Configuring Arc Caliper Properties -
Object
Definition
Properties
Pairs
Opens Edge Pair Collection Editor to set criteria for
valid edges.
Show Results Graphics
Specifies if the graphics are drawn in the Vision
Window.
Tool Links
Image Source
Defines the image source used for processing by
this vision tool.
Region of Interest (ROI)
Relative To
Specifies the tool that will provide the input to this
tool. The tool can be dragged from the Folder pane
and dropped into this field.
Search Region
Defines the Center, Radius, Rotation, Thickness,
and Opening of the ROI.
Advanced Properties
Bilinear Interpolation
Enabled
Specifies if bilinear interpolation is used to sample
the input image. By default, bilinear interpolation
is enabled because it ensures subpixel accuracy.
Custom Sampling Step
When enabled, uses the user-defined sampling
step instead of the default optimal sampling step
to sample the region of interest from the input
image.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 242