Adept AdeptSight User Guide - Manual (Page 536)

Basic Steps for Configuring Remote Vision
The results of the remotely-run vision tool will be transmitted from the Remote Vision
Server to the AdeptSight PC when that tool is run, through the Remote Vision tool.
l
When the Remote Vision tool is run from the Remote Vision tool editor, the
image will be displayed on the editor Vision Window.
l
When run from an AdeptSight application, such as the ACE PackXpert, the
image will not be displayed on the Vision Window.
NOTE: When running a vision tool through the Remote Vision tool, Live mode will not be
transmitted to the AdeptSight PC. Any configuration that needs to be performed in Live
mode, such as camera focusing, should be done on the Remote Vision Server before run-
ning the Remote Vision tool.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 536