Adept AdeptSight User Guide - Manual (Page 231)

Blob Analyzer on page 293.
Caliper
The Caliper identifies one or more edge pairs and measures distances between
the two edges within each pair. See Caliper on page 345.
Arc Caliper
The Arc Caliper identifies one or more edge pairs on an arc-shaped or circular
area and measures distances between the two edges within each pair. See Arc
Caliper on page 241.
Edge Locator
The Edge Locator identifies an edge or a set of edges that meet user-defined
criteria. See Edge Locator on page 377.
Arc Edge Locator
The Arc Edge Locator identifies an edge or a set of edges in an arc-shaped or cir-
cular area. See Arc Edge Locator on page 259.
Pattern Locator
The Pattern Locator identifies instances of a grayscale pattern. See Pattern
Locator on page 505.
Filter Tools
Filter tools let you specify criteria for limiting which instances will be processed. These criteria
include physical appearance (including color) of the instances and proximity of the instances
to each other.
Inspection Tool
The Inspection Tool analyzes the results of other tools based on a configuration
of inspection filters. See Inspection on page 455.
Color Matching Tool
The Color Matching tool filters and analyzes areas of specified color, or color
ranges in color images. See Color Matching on page 359.
Filter Tools
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 231