Adept AdeptSight User Guide - Manual (Page 369)

Creating and Configuring Color Filters
The Color Matching tool analyzes the region of interest by applying all the defined filters to
the image within the region of interest. Any number of filters can be added to the Color Match-
ing tool.
The Filters section contains a list of all the filters that are configured for the current tool.
From the Filters list, you can:
l Add color filters
l
Edit the color filters
l
Delete color filters
To add a filter:
Under the Filters list, click the Add icon. A filter is added with the default name:
Filter(n).
To delete a filter:
1. In the Filters list, select the filter to be removed.
2. Click the Delete icon.
To edit a filter:
1. In the Filter list, select the filter.
2. Click Edit or double-click on the filter name.
This opens the Color Finder window for the selected filter.
3. Configure the filter using the display or by entering values. See the following figure.
You can rename the filter from the Color Finder.
Configuring Color Filters in the Color Finder
Color filters can be configured and edited in the Color Finder. See the following figure.
A filter contains a color definition, displayed both as RGB and HSL values, and tolerances for
variations in hue, saturation, and luminance, with respect to the defined color. See Defining
a Color by its RGB values on page 371 and Defining a Color by its HSL Values on page 371.
The Color and the Tolerances can be set by entering values or by using the display and selec-
tion tools that are in the Color Finder.
To configure the color filter:
Creating and Configuring Color Filters
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 369