Adept AdeptSight User Guide - Manual (Page 460)

Configuration
Run the tool once
Run the tool continuously
Stop the tool from running
Reset the average value and iteration count
When the tool runs, the current value will be compared against the filter limits.
l
If the current value is between the limits, the limit indicator boxes will be
green.
l
If the current value is out of range, the indicator for the limit that was
exceeded will change to red, and the other limit indicator will be blank.
See the following figure.
l If either limit is exceeded, the Nominal indicator will be red.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 460