Adept AdeptSight User Guide - Manual (Page 378)

Configuration
Configuration
Object Definition
Properties
Filter Mode Determines the results that will be returned from
the tool (All, First Edge, Last Edge, or Middle).
Magnitude Threshold Sets the threshold used to find edges on the mag-
nitude curve.
Search Parameters Set polarity, constraints, and threshold used by
the tool.
Show Results Graphics Specifies if the graphics are drawn in the Vision
Window.
Tool Links
Image Source Defines the image source used for processing by
this vision tool.
Region of Interest (ROI)
Offset Specifies the center and rotation of the ROI. X, Y,
Degrees.
Relative To Specifies the tool that will provide the input to this
tool. The tool can be dragged from the Folder pane
and dropped into this field.
Search Area Defines the height and width of the region of inter-
est.
Advanced Properties
Bilinear Interpolation Enabled Specifies if bilinear interpolation is used to sample
the input image. By default, bilinear interpolation
is enabled because it improves accuracy.
Custom Sampling Step When enabled, the tool uses the user-defined
sampling step instead of the default optimal sam-
pling step to sample the region of interest from
the input image.
Edge Filter Half Width Sets the half-width of the filter used by the tool to
compute an edge magnitude curve from which
edges are detected.
Sort Results Enabled When enabled, the located edges will be sorted in
descending order of score values.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 378