Adept AdeptSight User Guide - Manual (Page 535)

1. Add a Remote Vision tool.
A configuration screen will be displayed:
Remote Vision Configuration Screen
2. In the Port Number field, enter the port number of the Remote Vision Server.
3. In the Vision Server IP Address field, enter IP address of the Remote Vision Server.
The Remote Tool Name list will be populated with the AdeptSight vision tools available
on the Remote Vision Server.
4. In the Time Out field, specify a time out, in milliseconds. This is the maximum time to
wait for the remote tool to complete its processing.
5. In the Remote Tool Name field, select the vision tool to run on the remote PC.
The field will be populated with the available tools on the server.
6. Run the Remote Vision tool (click Run).
Basic Steps for Configuring Remote Vision
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 535