Adept AdeptSight User Guide - Manual (Page 161)

l
Move the Robot to the Picture Position
1. Move the robot so the camera is over the target.
The target must be in the camera's field of view.
2. Click Here.
NOTE: The Vision Model for the test may be different than the model used to calibrate.
You will get best results if they are similar.
l
Teach the Vision Tool
The following figures show the model, origin, and bounding box before and after this
procedure has been performed.
AdeptSight Camera Calibration Wizard - Manual, Arm-Mount
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 161