Adept AdeptSight User Guide - Manual (Page 439)

Configuring Image Processing Properties - Advanced
The Advanced Properties section of the Image Processing Tool interface provides access to
advanced Image Processing Tool parameters and properties.
Arithmetic Properties
This is used to set the parameters for an arithmetic operation.
Arithmetic operations are applied in the following manner, depending on the type of operand.
l
If the operand is an Operand Image, the operation is applied to every pixel of an input
image and the corresponding pixel in the Operand Image. The result is written in the
output image.
l
If the operand is a constant, the constant is applied on every pixel of the input image
and the result is written in the output image.
Arithmetic Constant
Arithmetic Constant defines a constant that is applied as an operand by an arithmetic oper-
ator. This constant is applied only when no valid Operand Image is specified.
Arithmetic Scale
Arithmetic Scale sets the scaling factor applied by an arithmetic operation. After the oper-
ation has been applied, the value of each pixel is multiplied by the Arithmetic Scale value.
Assignment Properties
This is used to set the properties for an assignment operation.
Assignment operations promote the input values of the source pixels and the Operand values
to the more defined type, based on the input image, the Operand image or the desired output
image type. This type of operation does not support scaling or clipping
Arithmetic Constant
Arithmetic Constant defines constant that applied as an operand by an arithmetic operation.
This constant is applied only when no valid Operand Image is specified.
Assignment Height
Read-only. Assignment Height is a constant value indicates sets the height, in pixels, of the
output image.
Configuring Image Processing Properties - Advanced
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 439