Adept AdeptSight User Guide - Manual (Page 566)

V+Belt-Camera Sample
a. Click the browse icon to display a list of available robots.
b. Select the robot you wish to use.
c. Click OK.
d. Click Next.
The wizard records the robot information and opens the next page.
4. Select the end-effector.
The steps for selecting the end-effector are similar to those for selecting the robot.
5. Set the end-effector signal values.
Setting the End-effector Signals
A green button indicates the signal is enabled. Black indicates disabled.
An invalid value will turn the text box yellow.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 566