Adept AdeptSight User Guide - Manual (Page 333)

Calculated Line
You can use this tool to create lines from the results of other tools, or to place reference
(fixed) lines in the field of view.
A Calculated Line can be created from two points, or from a point and a line. In the latter
case, the calculated line will run through the point, and be perpendicular to the line.
Calculate Line generates a line based on a specific calculation mode. Possible modes are:
l
Two points
l Perpendicular line, given one line and one point
To create a Calculated Line tool, right-click in the Tree structure, then select:
New > Vision > Tool > Calculated Line
The following example calculates a line from two points.
Calculated Line
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 333