Adept AdeptSight User Guide - Manual (Page 278)

Configuration
Object Definition
Fit Mode Specifies the mode used to calculate and return
values for the found arc.
Minimum Arc Percentage Minimum percentage of arc contours that need to
be matched for an arc hypothesis to be considered
as valid.
Polarity Mode Selects the type of polarity accepted for finding an
entity. Polarity identifies the change in grey-level
values from the tool center (inside) towards the
outside.
Search Mode Specifies the method used to select a hypothesis.
Show Results Graphics Specifies if the graphics are drawn in the Vision
Window.
Tool Links
Image Source Defines the image source used for processing by
this vision tool.
Region of Interest (ROI)
Guideline Offset Defines the offset, from the center of the region of
interest, for the guideline.
Relative To Specifies the tool that will provide the input to this
tool. The tool can be dragged from the Folder pane
and dropped into this field.
Search Region Defines the Center, Radius, Rotation, Thickness,
and Opening of the ROI.
The Thickness cannot be set to more than twice
the radius, or the inner diameter would become
negative.
Advanced Properties
Arc Must Be Totally Enclosed When true, the start and end points of the arc
must be located on the radial bounding sides of
the region of interest. When false, the found arc
can enter and/or exit the region of interest at the
inner or outer annular bounds of the region of
interest.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 278