Adept AdeptSight User Guide - Manual (Page 602)

MicroV+ Fixed-Mount Sample
c. Click OK.
d. Click Next.
2. Select the end-effector.
a. Click the browse icon to display a list of available end-effectors.
b. Select the end-effector you wish to use.
c. Click OK.
d. Click Next.
3. Set the end-effector signal values.
Setting the End-effector Values
A green button indicates the signal is enabled. Black indicates disabled.
An invalid value will turn the text box yellow.
4. Choose between Existing and New Camera.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 602