Adept AdeptSight User Guide - Manual (Page 446)

Input
Input
The Input required by the Image Sharpness tool is an image provided by another tool.
Images can be provided by other tools, such as an Image Processing tool, if the purpose of
the tool is to analyze the sharpness of processed image.
To set the Input:
1. Execute the tool once to make sure that an input image is available.
2. From the Image Source list under the Tool Links section, select the tool that will pro-
vide the input image.
Configuration
Object Definition
Properties
Show Results Graphics Specifies if the graphics are drawn in the Vision
Window.
Tool Links
Image Source Defines the image source used for processing by
this vision tool.
Region of Interest (ROI)
Offset Specifies the center and rotation of the ROI. X, Y,
Degrees.
Relative To Specifies the tool that will provide the input to this
tool. The tool can be dragged from the Folder pane
and dropped into this field.
Search Area Defines the height and width of the region of inter-
est.
Advanced Properties
Bilinear Interpolation Enabled Specifies if bilinear interpolation is used to sample
the input image. By default, bilinear interpolation
is enabled because it improves accuracy.
Custom Candidate Points Sets the maximum number of points that can be
used by the tool to calculate the image sharpness.
Custom Sampling Step When enabled, the tool uses the user-defined sam-
pling step, instead of the default optimal sampling
step, to sample the region of interest from the
input image.
AdeptSight User's Guide, Version 3.2.x, Updated: 8/23/2012
Page 446