CommScope ATC300-2000 - Manual (Page 95)

ATC300-1000/2000 Teletilt ® RET System Section 9–Uploading Controller Firmware Using the IP Config Tool
Bulletin 639544 • Revision L August 2014 9-7
Figure 9-6. Files Ready To Be Uploaded To Controller Identified.
2. Click on Finish.
7. After the files have been added to the FTP server, a check mark with a plus sign is shown next to
the file to indicate it is ready for upload to the controller (Figure 9-6).
Click on Finish (Figure 9-6).
Note that uploaded files will have a rectangular symbol shown to the left, replacing the check mark.
as shown in Figure 9-7 on the next page.
1. Select the latest version file(s)
from the search results shown.