CommScope ATC300-2000 - Manual (Page 47)

Section 4–Changing IP Settings on the Local Computer Manually ATC300-1000/2000 Teletilt ® RET System
4-4 August 2014 Bulletin 639544 • Revision L
6. Obtain IP address automatically is usually the default selection for most users (Figure 4-4).
IMPORTANT
If ‘Use the following IP address’ is selected and IP settings are displayed, note these
settings exactly as they are displayed. These settings are needed in order to restore the
computer to its original IP identity.
7. If not already selected, click on Use the following IP address (Figure 4-4).
If this button is grayed out or cannot be selected, a user’s permission problem has occurred,
preventing completion of this procedure. Stop now and consult the IT department to correct this
problem.
Figure 4-4. Selecting Use the Following IP Address.
Click on Use the following IP address.