CommScope ATC300-2000 - Manual (Page 124)

Section 11–Device Discovery and Addressing ATC300-1000/2000 Teletilt ® RET System
11-12 August 2014 Bulletin 639544 • Revision L
11.6.2 Set AITM(s) to MultiRET Mode
This button is available when at least one Andrew AITM actuator in multiplesingle RET mode has been
found and is in the database. Select this option to change all AITMs that are in multiple-single RET
mode to multiRET mode. After the mode has been successfully changed, the devices will no longer
be in communication and should be deleted. Perform a new device scan to find the devices in their
new mode.
Figure 11-15. Andrew AITM Device in Multiple-Single RET Mode
Figure 11-16. Successful Mode Change from Multiple-Single RET to MultiRET